P4VM800(1.60).zip<- 바이오스 1.60 도스 (마우스 오른쪽 클릭 '다른 이름으로 대상 저장' 다운)
| »BIOS Update Utility | ASRFLASH.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press <F2> to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. ( How do I check the BIOS version?) | How do I check the BIOS version? | 1.The BIOS version can be found during system boot up.
 | 2.The BIOS version can be found in BIOS setup utility.
 |
|
| | The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
| | »Updating BIOS Procedures | Create a bootable system floppy disk. Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both ASRFLASH.EXE utility and BIOS file to the disk you created in step 1. Boot from the disk you created in step 2. At the "A:\" prompt, type ASRFLASH, hit space bar once, and type BIOS file name then press <Enter>. For example: A:\ASRFLASH K7S41GX2.00 <Enter> then you will see a message "Please wait for BIOS loading ROM". After 30 seconds, you will see the message "Flash ROM Update Completed - Pass", then you have finished upgrading the BIOS. After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press <F2> to enter the BIOS setup utility during boot up. In Exit menu, please select "Load Default Settings" and press <Enter> to continue. Select "Exit Saving Changes" and press <Enter> to exit the BIOS setup utility. Now, system is booting up with new BIOS.
| | »Notice |  If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service. |
|
P4VM800(1.60)Win.zip <- 1.60 바이오스 윈도우 (마우스 오른쪽 클릭 '다른 이름으로 대상 저장' 다운)
| »BIOS Update Utility | AFUWIN.EXE, UCORESYS.SYS, UCOREVXD and UCOREW64.SYS: These are the Flash Memory Writer utility that updates the BIOS to the programmable flash ROM chip on specific model. The latest BIOS is embedded within AFUWIN.EXE. To determine the BIOS version of your motherboard, press <F2> to enter the BIOS setup utility during boot up, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works in Windows � 98, Windows � XP and Windows � XP 64-bit. And this utility is included in the BIOS package. ( How do I check the BIOS version?) | How do I check the BIOS version? | 1.The BIOS version can be found during system boot up.
| 2.The BIOS version can be found in BIOS setup utility.
|
|
| | The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
| | »Updating BIOS Procedures | Download the BIOS package (WinZip format with .zip file extension). And close all programs. Unzip and save all files to the same directory of any storage location accessible by the host system. And you should see AFUWIN.EXE, UCORESYS.SYS, UCOREVXD and UCOREW64.SYS. Click AFUwin.exe.  It shows a dialog icon to remind you to close other programs. Click "OK".  After finishing upgrading the BIOS, it shows a dialog icon to remind you to restart the system. Click "Yes".  After system restart, press <F2> to enter the BIOS setup utility during boot up. In Exit menu, please select "Load Default Settings" and press <Enter> to continue. Select "Exit Saving Changes" and press <Enter> to exit the BIOS setup utility. Now, system is booting up with new BIOS.
| | »Notice | If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service. |
|
Floppy_IVE10.zip<- 7/26/2006 SATA RAID Driver
(For system to read from floppy diskette during Windows installation) 마우스 오른쪽 클릭 '다른 이름으로 대상 저장' 다운
| »SATA RAID Driver Installation Guide | SATA RAID Driver is for users who plan to install Windows OS on SATA / SATAII HDDs with RAID functions. To use RAID functions, you need to make a SATA RAID Driver floppy diskette before you install the operation system, such as Windows XP. If you do not plan to use RAID functions, it is not necessary to make a SATA RAID Driver floppy diskette. Please follow below steps for the usage of SATA RAID Driver: Copy the SATA RAID Driver from our website to your SATA HDDs. Unzip it, and copy all the files and folders to an empty diskette. Make sure that the “SATA Operation Mode” option in BIOS setup is set to RAID mode. Install Windows OS to your system. At the beginning of Windows setup, please press F6 and insert the SATA RAID Driver floppy diskette you just made. Then you are allowed to select the required driver to install after your system reading the SATA RAID Driver floppy diskette. After Windows OS installation, use the RAID tool in our support CD to configure RAID arrays under BIOS or Windows environment.
For the details of RAID operation procedures, please refer to our user manual in the support CD or quick installation guide for further information. |
|
LAN_XP_2K_ME_98(3.5).zip<-11/6/2003 Lan driver ver:3.5 (랜 카드드라이버) 마우스 오른쪽 클릭. '다른 이름으로 대상 저장' 선택 다운.
※Onboard VGA driver ver:16.01.23.15 온보드 그래픽(내장 비디오) 드라이버(5/9/2005)※
http://blogfile.paran.com/BLOG_329764/200710/1192496252_VGA_98_ME_P4M800(16.01.23.15).part1.rar
http://blogfile.paran.com/BLOG_329764/200710/1192496418_VGA_98_ME_P4M800(16.01.23.15).part2.rar윈도우98,ME OS 사용자 드라이버.(마우스 오른쪽 클릭. '다른 이름으로 대상 저장' 선택 다운.)
http://blogfile.paran.com/BLOG_329764/200710/1192496358_VGA_XP_2K_P4M800(16.94.44.09).part1.rar
http://blogfile.paran.com/BLOG_329764/200710/1192496418_VGA_XP_2K_P4M800(16.94.44.09).part2.rar윈도우 2000, XP OS 사용자 드라이버.(마우스 오른쪽 클릭. '다른 이름으로 대상 저장' 선택 다운.)
※ VIA ComboRAID driver ver:4.30g 6/28/2005 ※
http://blogfile.paran.com/BLOG_329764/200710/1192497338_SATA_XP64_XP_2K_ME_98(430g).part1.rar
http://blogfile.paran.com/BLOG_329764/200710/1192497411_SATA_XP64_XP_2K_ME_98(430g).part2.rar윈도우 98, ME, 2K, XP OS 사용자 드라이버. (마우스 오른쪽 클릭. '다른 이름으로 대상 저장' 선택 다운.)
※ USB 2.0 driver 2.52 11/14/2002 ※
http://blogfile.paran.com/BLOG_329764/200710/1192497269_USB_ME_98(2.52).rar윈도우 98, ME OS 사용자 드라이버. (마우스 오른쪽 클릭. '다른 이름으로 대상 저장' 선택 다운.)
※ VIA 4 in 1 driver ver: 4.56 3/23/2005 ※
http://blogfile.paran.com/BLOG_329764/200710/1192497411_4in1_XP_2K_ME_98(4.56).zip윈도우 98, ME, 2K, XP OS 사용자 드라이버. (마우스 오른쪽 클릭. '다른 이름으로 대상 저장' 선택 다운.)
※출처는 http://www.asrock.com, http://www.asrock.com/mb/download.asp?Model=P4VM800&s= ※
1192495194_P4VM800(1.60).zip
1192496252_VGA_98_ME_P4M800(16.01.23.15).part1.rar
